Nortel DMS-100 Series Reference Manual page 487

Remote Switching Center Multi-access (RSC-M)
Datafilling table PMNODES
Subfield or
Field
refinement
PACKED
SUPPCDM
CMINCTRL
Datafill example for table PMNODES
Datafill for an RSC-M node, with a remote cluster controller (RCC) node
that connects to the RSC-M, appears in the following example.
MAP example for table PMNODES (RSC-M tuple)
Table: PMNODES
STPORT
RSVTERMS MATENODE
Datafilling table LTCINV
Table line trunk controller inventory (LTCINV) contains the inventory data,
except the P-side link assignment, for PM type PLGC. With the RSC-M
configuration, this table contains descriptions of LGCOOi+ as PLGC on the
C-side of the RSC-M.
DMS-100 Family XPM International Translations Reference Manual, ISN06 (TDM)
(continued)
Entry
Y or N
Y Y or N N
Y or N
TABKEY EXTNDNUM NODETYPE
33 1 33 RCC_NODE
TERMS STTERM PROTOCOL MS IPML MODE SLLCON NT6X28 LCMLGMEM RSVPORTS
0 641 1
PACKED SUPPCDT CMINCTRL
Y N
Datafilling Remote Switching Center Multi-Access 5-27
Description
Packed internal tables. Enter Y if internal node
tables are packed on this node. Before this
feature, the node table was compressed when
the user used NODATASYNC option to RTS
the XPM. Compression occurs when the
system takes the two units of an XPM
out-of-service (OOS) and the CM loads the
units.
Support CDT. Enter Y for each unit if the
system supports CDT management.
CM node control. Enter Y if the node is under
CM control.
—end—
PMTYPE LEVEL MSGHOST
RCO2 0
MDMSX S N P
Y YY Y
(continued)
PHYSHOST PORTS
33 33 16
N N N Y