Nortel DMS-100 Series Reference Manual page 138

3-114 Datafilling ESA lines and trunks on RSC-S International
ESA lines and trunks
Translations table flow
The ESA lines and trunks translation process appears in the following
flowchart.
Table flow for ESA lines and trunks
Table CUSTHEAD links a customer group to the prefix translation table
name that table ESAPXLA identifies. Field XLANAME table CUSTHEAD
corresponds to the prefix translator name assigned in field XLANAME from
table ESAPXLA. The field name corresponds to the translator name to
access prefix translation data.
Table ESAPXLA supports line-to-trunk, trunk-to-trunk and trunk-to-line call
processing in the RSC-S during ESA. Table ESAPXLA contains special
prefix translation data used for POTS and MDC customers. Fields
PMTYPE, SITE, and RCCNO in table ESAPXLA correspond to fields
PMTYPE, SITENM and RCCNO from table RCCINV. The data
corresponds to provide access to inventory data for the identified RCO2.
The corresponding data does not provide to P-side link assignments.
Table RCCINV maintains a list of RCO2s entered in the DMS system and
contains inventory data. Table RCCINV does not contain RCO2 P-side link
assignments. The table identifies the location of the RCO2, the required
load and exec lineups and the network link connections. Enter the C-side
PCM-30 assignments for the RCO2 in table RCCINV. Enter intraswitching
in table RCCINV.
Enter load information for this table in field LOAD and corresponds to the
LOADNAME tuple from table PMLOADS. The RCCNAME tuple in table
RCCINV corresponds to the RCCNAME tuple from table RCCPSINV.
297-8331-815 Standard 10.01 August 1999
(continued)
Table
RCCINV
PMTYPE
SITENM
RCCNO
PMTYPE
SITE
RCCNO
Table
ESAPXLA
XLANAME
Table
CUSTHEAD
XLANAME