Nortel DMS-100 Series Reference Manual page 380

4-130 Datafilling PCM-30 trunks on RSC-S UK / Europe
PCM-30 R1 Trunking
Datafilling table SITE
Subfield or
Field
refinement
NAME
LTDSN
MODCOUNT
OPVRCLLI
ALMDATA
Note 1: Make changes to fields with multiple entries in the PROMPT mode. The nonprompt mode
does not require current entries.
Note 2: When the next line specifies more data or records, enter the continuation mark (+) in fields
with multiple possible entries. Enter the end mark ($) in fields with multiple possible entries after the
last entry.
297-8331-815 Standard 10.01 August 1999
(continued)
Entry Explanation and action
alphanumeric Site name. Enter the site name assigned to the
remote switching unit. The first character must
be alphabetic. Site names can contain a
maximum of 4 characters. Site names cannot
use PM names. The first entry in this field is for
the host switching unit.
00 to 99 Line equipment number test desk site number.
Enter a separate 2-digit number to dial the site
that appears under field NAME.
0 Module count.
alphanumeric Operator verification CLLI. Enter the CLLI
assigned to the operator verification trunk group
at the remote location.
see subfields Alarm data. This field is for remote locations
only and contains subfields ALMTYPE,
TMTYPE, TMNO, CKTNO, and POINT. Refer
to Note 2 for information about how to terminate
data entry.