Nortel DMS-100 Series Reference Manual page 350

4-100 Datafilling BAS on RSC-S UK / Europe
Basic call processing
Datafilling table MTAHORIZ
Subfield or
Field
refinement
SELECTOR CLLI
( )
continued
EXTRKNM
BBTNR
EMTAVERT
MJACKNUM
MTAGRP
MTAMEM
297-8331-815 Standard 10.01 August 1999
(continued)
(continued)
Entry
alphanumeric
0 to 9999
0 to 7
0 to 639
1 to 256
refer to
subfields
0 to 255
—continued—
Explanation and action
Common language location identifier.
Enter LTU for line test unit.
Enter MTU for metal test unit.
Enter MJACK for metal jack.
Operator verification or an incoming test access
trunk. Enter the alphanumeric code that
represents this trunk group in table CLLI.
External trunk number. Enter the external trunk
number assigned in table TRKMEM to the
following:
line test unit
metal test unit
operator verification trunk
incoming test access trunk
Board-to-board testing number. Enter the
number of the board-to-board set that the
horizontal associates with.
Extended metal test access column. Enter the
associated vertical on the MTA in the host
where the horizontal connects.
Metal jack number. Where the entry in subfield
CLLI is MJACK, enter the metal jack number.
The MTA group. This field contains a list of
MTA drivers that multiply to the test equipment.
This field is a vector of a maximum of 32
multiples of subfields MTAMEM, HORIZ, and
CONTMARK.
MTA minibar driver member. Enter MTAM
driver member number where the horizontal
connects.