Nortel DMS-100 Series Reference Manual page 243

Datafill example for table PMLOADS
Sample datafill for table PMLOADS appears in the following example.
MAP display example for table PMLOADS
Table LTCINV
Table line trunk controller inventory (LTCINV) identifies to the DMS
software a host XPM peripheral. Information about the peripheral includes
location, load required, and network link connections. This table supports
the universal tone receiver.
The following table shows the datafill exact to firmware downloading for
table LTCINV. Only fields that apply directly to firmware downloading are
in the table. Refer to the data schema section of the Translations Guide for a
description of the other fields. The table has an additional field that contains
the name of the loadfile associated with the electrically erasable
programmable read-only memory (EEPROM).
DMS-100 Family XPM International Translations Reference Manual XPM12 and up
Datafilling Firmware downloading on RSC-S International 3-219
LOADNAME
ACTFILE ACTVOL
BKPFILE BKPVOL
________________________________________________________
ELI36xx
ELI36xx S00DXPM
ELI36xx S00DXPM
Note: The in field LOAD stands for two letters, for example
xx
Firmware downloading
UPDACT
Y
(continued)
.
BZ