Nortel DMS-100 Series Reference Manual page 242

3-218 Datafilling Firmware downloading on RSC-S International
Firmware downloading
Datafilling table PMLOADS
Subfield or
Field
refinement
LOADNAME
ACTFILE
ACTVOL
BKPFILE
BKPVOL
UPDACT
297-8331-815 Standard 10.01 August 1999
(continued)
Entry Explanation and action
alphanumeric Peripheral module load name. Enter the XPM
load name. Range is a maximum of 32
characters. This loadname must be the same
as the load name entered in tables LTCINV and
RCCINV.
alphanumeric Active load file name. The name of the active
XPM loadfile. This name can be the original
loadfile or a patched loadfile. The name has a
maximum of 32 characters. Before patching,
this name is the original load name. The XPM
load file patching updates the field after the load
is patched for a period of time. This period of
time is soak time.
alphanumeric Active volume. Identifies the device that stores
the active loadfile. Range is the set of disk
drive unit (DDU) volumes and system load
module (SLM) disks available to the CM, that is,
S00DXPM. The name has a maximum of 16
characters.
alphanumeric Backup load file name. Identifies the name of
the backup XPM loadfile. The name should be
the same name as the LOADNAME field. The
name has up to 32 characters.
alphanumeric Backup volume. The device where the backup
loadfile is stored. Range is the set of DDU
volumes and SLM disks available to the C, that
is, S00DXPM. The name has a maximum of 16
characters.
Y or N Update active filename. This filename
determines if the loadfile is qualified for loadfile
patching. This filename determines if the
system automatically updates table PMLOADS
fields ACTFILE and ACTVOL with the patched
loadfile name.