Nortel DMS-100 Series Reference Manual page 308

4-58 Datafilling BAS on RSC-S UK / Europe
Basic call processing
Datafilling table Line Trunk Controller P–Side Link Inventory
(LTCPSINV)
Table LTCPSINV contains P-side link assignments for host PMs. The key
for table LTCPSINV is the same as the key for table LTCINV. The system
allocates memory automatically for a maximum of 128 tuples.
The datafill for table LTCPSINV appears in the following table. The table
contains fields that apply to basic call processing. Refer to the data schema
section of the Translations Guide for a description of the other fields.
Datafilling table LTCPSINV
Subfield or
Field
refinement
LTCNAME
XPMTYPE
XPMNO
PSLNKTAB
PSLINK
Note: The value of AREASELCT determines Datafilling fields in PSDATA. If AREASELCT is
DS30A, DCH, or NILTYPE, no other fields require entry. If PSDATA is D30, complete fields
CARRIDX and ACTION.
297-8331-815 Standard 10.01 August 1999
(continued)
Entry Explanation and action
refer to Link trunk controller name. Contains subfields
subfields XPMTYPE and XPMNO.
PLGC The PM type. The PM type must match the
entry in subfield XPMTYPE in table LTCINV.
0 to 255 The PM number. The PM number corresponds
to the subfield XPMNO entered in LTCINV.
0 to 19 The P-side link. The P-side contains subfields
PSLINK, PSDATA, and CONTMARK. Enter the
vector number.
Note: Make changes to fields with multiple
entries in the PROMPT mode only.
0 to 19 The P-side link. Enter the P-side port number.
—continued—