Class - Nortel DMS-100 Series Reference Manual

support for RSC-M PM maintenance, carrier maintenance, line
maintenance and call processing
support for static data downloads of information from the AN nodes to
the RSC-M. The RSC-M provides information about the card type of
the terminals
support for data and human-machine interface (HMI) for the following:
— two additional PM types, that represent the RSC-M and the ANs that
connect to the RSC-M
— the MAP levels like PM and carrier levels
— the EXT shelf definition and support
– entry of data in the EXT shelf for RSC-M in table LTCINV
– display of circuit cards with possible faults in the EXT shelf
– display of EXT shelf information in the PM MAP level through
the use of the QUERYPM command
– the EXT circuit card (NTMX87AA) diagnostics
— P-side port expansion with support for a maximum of 48 P-side links
The following features are available to end users with standard DP or DTMF
telephone sets. The end users must have telephone sets that connect to a
DMS switch through the RSC-M AN line interface. The available features
are:
call disposal features
call barring and authorization features
call forwarding features
conference call features
speed calling features
message waiting features
uniform call distribution (UCD) features
ring again (RAG) features
different features, like Call Pickup, Hunting and Executive Busy
Override

CLASS

The CLASS features provide residential (RES) customers with expanded
features and capabilities. Calling Number Delivery (CND or CLI) is a
CLASS feature. This feature provides the ability to deliver the directory
number of the calling party. The CLASS feature also provides the ability to
DMS-100 Family XPM International Translations Reference Manual XPM12 and up
Introduction to Remote Switching Center Multi-access 5-5