Amplifier-Chain (Iplc) - Juniper PTX3000 IPLC Features Manual

PTX3000 Integrated Photonic Line System Feature Guide

amplifier-chain (IPLC)

Syntax
Hierarchy Level
Release Information
Description
Options
88
amplifier-chain {
anchor-iplc ;
ila ila-number {
ila-options ;
no-anchor-iplc ;
osc-ip ip-address/CIDR ;
osc-mac osc-mac;
}
}
[edit chassis fpc fpc-slot optical-options]
Statement introduced in Junos OS Release 17.1R1 on the PTX3000 integrated photonic
line system.
Configure the optical supervisory channel (OSC) for the PTX3000 integrated photonic
line system and optical ILAs in the amplifier chain. This command includes parameters
that enable IP connectivity for the OSC in the line system and amplifier chain.
The options available under the
with configuring and enabling OSC communications over the amplifier chain of the
PTX3000 integrated photonic line system. You must specify the following options in
order to enable OSC communication, which enables you to configure and manage Juniper
Networks optical inline amplifier through the Junos OS CLI:
anchor-iplc—Configure the specified IPLC as the anchor IPLC for the optical supervisory
channel (OSC). Use this option to specify one of the IPLC modules in the amplifier
chain as the anchor of the chain. You can only have one IPLC anchor in the amplifier
chain. This option is only available if the specified slot contains an IPLC base module.
ila ila-number—Configure a unique identification number for the specified optical ILA.
This option is only available if the specified slot contains an IPLC base module and
you are using the optical ILA in the amplifier chain.
no-anchor-iplc—(Optional) Disable the IPLC from performing anchor queries. You can
configure only one IPLC as the anchor of the amplifier chain. You can optionally
enable this option on the remote IPLC, that is not performing the anchor function.
This option is only available if the specified slot contains an IPLC base module.
osc-ip osc-ip—Specify the IP address of the anchor IPLC. All IP addresses associated
with the OSC must be on the same private subnet. This option is only available if the
specified slot contains an IPLC base module.
osc-mac osc-mac—Specify the MAC address of the anchor IPLC. This option is only
available if the specified slot contains an IPLC base module.
All other options are explained separately.
configuration hierarchy are all associated
amplifier-chain
Copyright © 2018, Juniper Networks, Inc.