Table 38: Tca Descriptions - Juniper PTX3000 IPLC Features Manual

Table 37: show chassis fpc optical-properties pm-current Output Fields (continued)
Field Name
MAX
AVG
THRESHOLD (MIN) (MAX)
TCA-ENABLED (MIN) (MAX)
TCA-RAISED (MIN) (MAX)

Table 38: TCA Descriptions

Threshold Crossing Alert Name
OSC-A Tx Power(0.01 dBm), OSC-B Tx Power(0.01 dBm)
OSC-A Rx Power(0.01 dBm), OSC-B Rx Power(0.01 dBm)
OSC-A Fiber Loss(0.01 dB), OSC-B Fiber Loss(0.01 dB)
Line OUT VOA-A(0.01 dB), Line OUT VOA-B(0.01 dB)
EDFA A-B Input Power(0.01 dBm), EDFA B-A Input Power(0.01
dBm)
EDFA A-B Output Power(0.01 dBm), EDFA B-A Output Power(0.01
dBm)
EDFA A-B Signal Output Power(0.01 dBm), EDFA B-A Signal
Output Power(0.01 dBm)
EDFA A-B Pump 0 Current(0.01mA), EDFA B-A Pump 0
Current(0.01mA)
EDFA A-B Pump 1 Current(0.01mA), EDFA B-A Pump 1
Current(0.01mA)
EDFA A-B Pump 0 Temperature(C), EDFA B-A Pump 0
Temperature(C)
EDFA A-B Pump 1 Temperature(C), EDFA B-A Pump 1
Temperature(C)
Copyright © 2018, Juniper Networks, Inc.
Field Description
Maximum value measured.
Average value.
Threshold value set for the minimum and maximum values.
Threshold-crossing alert (TCA) set for the minimum and maximum values.
TCA is enabled.
TCA raised for the minimum and maximum values.
Description
Optical supervisory channel (OSC) A or B TX transmit power
value. The unit is dBm.
OSC (A or B) RX receive power value. The unit is dBm.
OSC fiber loss value (for OSC A or B) The unit is dBm.
Line out variable optical attenuator (VOA) value (A or B)
Erbium-doped fiber amplifier (EDFA) input power, for EDFA
A-B or B-A.
Output optical power, for EDFA A-B or B-A. The unit is dBm.
Signal output power for EDFA A-B or B-A.. The unit is dBm.
Electric current for pump 0 for EDFA A-B or B-A.
Electric current for pump 1 for EDFA A-B or B-A.
EDFA's pump 0 temperature for EDFA A-B or B-A.
EDFA's pump 1 temperature for EDFA A-B or B-A.
Chapter 12: Operational Commands
Yes
: TCA crosses the threshold.
Yes
:
479