Understanding How To Configure The Osc Using The Junos Os Cli; Chain - Juniper PTX3000 IPLC Features Manual

Table 3: Summary of Optical ILA Configuration Capabilities in Junos OS CLI (continued)
Optical ILA
Configuration Capability
in Junos OS CLI
Performance monitors
Related
Documentation
Copyright © 2018, Juniper Networks, Inc.
Chapter 2: Understanding Optical Supervisory Channel Communication in the Amplifier Chain
What it is and Where to Find it in the Guide
Configure and view threshold crossing alerts (TCA)s for the optical ILA performance monitors.
Performance monitors monitor the health of the optical ILA at various points on the optical ILA
hardware based on threshold levels. TCAs can give the management system an early indication
as to the state of the associated entity when it crosses a certain threshold. You can use the CLI
to configure and manage the these items on the optical ILA performance monitors:
Enable and configure TCAs on an optical ILA, see
Optical Inline Amplifier Performance Monitors" on page
View statistics for the optical ILA performance monitors including:
show chassis fpc optical-properties amplifier-chain ila pm-current
show chassis fpc optical-properties amplifier-chain ila pm-currentday
show chassis fpc optical-properties amplifier-chain ila pm-previousday

Understanding How to Configure the OSC Using the Junos OS CLI

To configure the OSC in the PTX3000 integrated photonic line system and amplifier

chain:

Configure one of the IPLC modules in the line system as the anchor IPLC, see
1.
"Configuring the Anchor IPLC of the Amplifier Chain" on page
Configure a unique IP address on the anchor IPLC module, see
2.
Address of the Anchor IPLC" on page
Configure the MAC address of the anchor IPLC, see
3.
the Anchor IPLC" on page
Configure a unique identification number for each optical ILA in the amplifier chain,
4.
see "Configuring the Optical ILA Identification Number" on page
Configure a unique IP address for each optical ILA in the amplifier chain, see
5.
"Configuring the IP Address of an Optical Inline Amplifier" on page
For the complete procedure, see
the Amplifier Chain of the PTX3000 Integrated Photonic Line System" on page
Enabling and Configuring Thresholds on the Optical Inline Amplifier Performance
Monitors on page 51
Enabling and Configuring Thresholds on the Integrated Photonic Line Card Performance
Monitors on page 45
Configuring the Optical Supervisory Channel Across the Amplifier Chain of the PTX3000
Integrated Photonic Line System on page 33
Example: Configuring the Optical Supervisory Channel for the Integrated Photonic Line
System and Optical Inline Amplifier on page 73
"Enabling and Configuring Thresholds on the
51.
35.
"Configuring the MAC Address of
36.
"Configuring the Optical Supervisory Channel Across
34.
"Configuring the IP
37.
39.
33.
15