Table 28: Show Chassis Environment Fpc Output Fields - Juniper PTX3000 IPLC Features Manual

Output Fields

Table 28: show chassis environment fpc Output Fields

Field Name Field Description
Status of the FPC:
State
Temperature (M40e and M160 routers and QFX Series only) Temperature of the air flowing past the FPC.
PMB Temperature (PTX Series only) Temperature of the air flowing past the PMB (bottom of the FPC).
The PTX5000 Packet Transport Router with FPC2-PTX-P1A include multiple temperatures for PMB
( TEMP0
PMB CPU Temperature (PTX5000 Packet Transport Router with FPC2-PTX-P1A only) Temperature of the air flowing past
the PMB CPU.
(M320 routers, MX2010 routers, MX2020 routers, MX2008 routers, and PTX Series only) Temperature
Temperature Intake
of the air flowing into the chassis.
Temperature Top (T Series routers only) Temperature of the air flowing past the top of the FPC.
Temperature Exhaust (M120 and M320 routers, MX2010 routers, MX2020 routers, MX2008 routers, and PTX Series only)
Temperature of the air flowing out of the chassis.
The PTX Series Packet Transport Routers, and the MX2010, MX2020, and MX2008 routers include
exhaust temperatures for multiple zones (
Temperature Bottom (T Series routers only) Temperature of the air flowing past the bottom of the FPC.
Copyright © 2018, Juniper Networks, Inc.
show chassis environment fpc 0 (PTX5000 Packet Transport Router) on page 424
show chassis environment fpc 07 (PTX5000 Packet Transport Router with
FPC2-PTX-P1A) on page 425
show chassis environment fpc (PTX10008 router) on page 426
show chassis environment fpc (PTX10016 router) on page 429
show chassis environment FPC 1 (MX Routers with Media Services Blade
[MSB]) on page 432
show chassis environment fpc (EX9251 Switches) on page 433
show chassis environment fpc (EX9253 Switches) on page 433
Table 28 on page 389 lists the output fields for the
Output fields are listed in the approximate order in which they appear.
—FPC is not detected by the router.
Unknown
—No FPC is present.
Empty
Present —FPC is detected by the chassis daemon but is either not supported by the current version
of the Junos OS, or the FPC is coming up but not yet online.
Ready —FPC is in intermediate or transition state.
Announce online —Intermediate state during which the FPC is coming up but not yet online, and the
chassis manager acknowledges the chassisd FPC online initiative.
—FPC is online and running.
Online
—FPC is powered down.
Offline
—FPC is set to operate in diagnostics mode.
Diagnostics
and TEMP1 ).
Chapter 12: Operational Commands
show chassis environment fpc
Exhaust A and Exhaust B ).
command.
389