CHAPTER 10
Troubleshooting and Maintenance
Enabling or Disabling Erbium-Doped Fiber Amplifiers
Copyright © 2018, Juniper Networks, Inc.
Enabling or Disabling Erbium-Doped Fiber Amplifiers on page 81
Enabling or Disabling the Optical Supervisory Channel Laser on page 82
Resetting an Optical Inline Amplifier Through the Junos OS CLI on page 83
When you need to perform maintenance or troubleshooting, you can disable the
erbium-doped fiber amplifiers on the IPLC.
BEST PRACTICE:
from the
Line IN
disable the optical supervisory channel and the erbium-doped fiber amplifiers
on the IPLC.
Always refer to the PTX3000 Packet Transport Router Hardware Guide when
connecting or disconnecting cables on the IPLC modules. See
Transport Router Hardware Guide
To enable or disable the erbium-doped fiber amplifiers on the IPLC:
Access the IPLC configuration hierarchy.
1.
For example, if the IPLC resides in slot 2:
[edit]
user@host# edit chassis fpc 2
(Optional), To enable the erbium-doped fiber amplifiers on the IPLC.
2.
[edit chassis fpc 2 optical-options]
user@host# set no-disable-edfa
(Optional), To disable the erbium-doped fiber amplifiers on the IPLC.
3.
[edit chassis fpc 2 optical-options]
user@host# set disable-edfa
Anytime you need to disconnect or connect the fiber span
and
Line OUT
ports on the IPLC module, we recommend you
.
optical-options
PTX3000 Packet
81