Configuring The Anchor Iplc Of The Amplifier Chain - Juniper PTX3000 IPLC Features Manual

PTX3000 Integrated Photonic Line System Feature Guide
Related
Documentation

Configuring the Anchor IPLC of the Amplifier Chain

34
Configure the MAC address of the anchor IPLC, see
3.
the Anchor IPLC" on page
Configure a unique identification number for each optical ILA in the amplifier chain,
4.
see "Configuring the Optical ILA Identification Number" on page
Configure a unique IP address for each optical ILA in the amplifier chain, see
5.
"Configuring the IP Address of an Optical Inline Amplifier" on page
Understanding Optical Supervisory Channel Communication in the Amplifier Chain on
page 11
Example: Configuring the Optical Supervisory Channel for the Integrated Photonic Line
System and Optical Inline Amplifier on page 73
To enable optical supervisory channel (OSC) communications and manage optical inline
amplifiers (ILA)s in the amplifier chain, you need to configure one of the IPLCs in the
PTX3000 integrated photonic line system as the anchor of the amplifier chain. All
communications to and from any optical ILA in the amplifier chain is handled by the
anchor IPLC. Use this procedure when you are using the PTX3000 integrated photonic
line system with the optical ILA to enable OSC communication across the optical network
or to enable management of certain optical ILA parameters through the Junos OS CLI.
NOTE: There can be only one anchor IPLC in the amplifier chain and all IP
addresses within the chain must be on the same private subnet.
Before you begin, make sure you complete the following tasks:
Configure the IP address of the anchor IPLC. See,
1.
Anchor IPLC" on page 35
Configure the MAC address of the anchor IPLC. See,
2.
of the Anchor IPLC" on page 36
To configure an IPLC as the anchor of the amplifier chain:
Specify the slot in which the IPLC resides and access the IPLC amplifier chain
1.
configuration hierarchy.
[edit]
user@host# edit chassis fpc fpc-slot
For example:
[edit]
user@host# edit chassis fpc 3 optical-options amplifier-chain
"Configuring the MAC Address of
36.
"Configuring the IP Address of the
optical-options amplifier-chain
Copyright © 2018, Juniper Networks, Inc.
37.
39.
"Configuring the MAC Address