Table 6: Optical Ila Performance Monitors - Juniper PTX3000 IPLC Features Manual

PTX3000 Integrated Photonic Line System Feature Guide

Table 6: Optical ILA Performance Monitors

Performance Monitor
OSC TX power
OSC RX power
OSC estimated fiber loss
Line OUT VOA attenuation
EDFA Input power (for both EDFAs)
EDFA Output power (for both EDFAs)
EDFA Signal output power (for both EDFAs)
EDFA Pump current (for both EDFAs)
EDFA Pump temperature (for both EDFAs)
52
NOTE: The optical supervisory channel (OSC) must be operational across
the amplifier chain to enable and configure TCAs for the performance
monitors on the optical ILA. For details on configuring the OSC, see
"Configuring the Optical Supervisory Channel Across the Amplifier Chain of
the PTX3000 Integrated Photonic Line System" on page
The optical ILA supports the performance monitors listed in
Each performance monitor supports:
15-minute and 24-hour binning
Low and high threshold levels as described in
15 Min Bin 24 Hr Bin
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Table 7 on page
Copyright © 2018, Juniper Networks, Inc.
33.
Table 6 on page 52.
TCA High TCA Low
Yes Yes
Yes Yes
No No
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
53.