Juniper PTX3000 IPLC Features Manual page 95

Action
Meaning
Related
Documentation
Copyright © 2018, Juniper Networks, Inc.
Optical ILA name, OSC IP address/IP mask, status: Up/Down, and where the optical
ILA is connected to from IPLC's perspective
On the PTX 3000 at Site A, from operational mode, run the
optical-properties amplifier-topology
amplifier chain.
user@host> show chassis fpc optical-properties amplifier-topology fpc-slot 3
IPLC Amplifier Topology Information
Name IP Addr/Subnet
Anchor IPLC 10.0.0.10/255.255.255.0 UP
ILA-0 10.0.0.11/255.255.255.0 UP
ILA-1 10.0.0.12/255.255.255.0 UP
ILA-2 10.0.0.13/255.255.255.0 UP
On the PTX 3000 at Site B, from operational mode, run the
optical-properties amplifier-topology
amplifier chain.
user@host> show chassis fpc optical-properties amplifier-topology fpc-slot 3
IPLC Amplifier Topology Information
Name IP Addr/Subnet
No-Anchor IPLC 10.0.0.14/255.255.255.0 UP
ILA-0 10.0.0.11/255.255.255.0 UP
ILA-1 10.0.0.12/255.255.255.0 UP
ILA-2 10.0.0.13/255.255.255.0 UP
The output shows the correct topology based on
optical ILAs show are reachable indicating OSC communications are functioning properly.
Understanding Optical Supervisory Channel Communication in the Amplifier Chain on
page 11
Configuring the Optical Supervisory Channel Across the Amplifier Chain of the PTX3000
Integrated Photonic Line System on page 33
Chapter 9: Example: Configuring the Optical Supervisory Channel
command to display the OSC topology for the
Reachable
command to display the OSC topology for the
Reachable
Figure 6 on page
show chassis fpc
Connected To
N/A
IPLC-3
ILA-0
ILA-1
show chassis fpc
Connected To
N/A
ILA-1
ILA-2
IPLC-3
74. In addition, all
79