Juniper PTX3000 IPLC Features Manual page 124

PTX3000 Integrated Photonic Line System Feature Guide
Table 13: IPLC Threshold Crossing Alert Minimum and Maximum Values (continued)
TCA Identifier
Erbium-Doped Fiber Amplifier (EDFA) Input Power (for Both EDFAs)
Optical Channel Monitor (OCM) Power Readings (64 channels x 1 Monitoring Points)
ocm-power-high-line-out-tca
ocm-power-low-line-out-tca
Optical Supervisory Channel (OSC) Estimated Fiber Loss
osc-fiber-loss-high-tca
osc-fiber-loss-low-tca
Optical Supervisory Channel (OSC) RX Power
osc-rx-power-high-tca
osc-rx-power-low-tca
Optical Supervisory Channel (OSC) TX Power
osc-tx-power-high-tca
osc-tx-power-low-tca
Default
108
Description
OCM Power Line Out high TCA
OCM Power Line Out low TCA
OSC fiber loss high TCA
OSC fiber loss low TCA
OSC RX power high TCA
OSC RX power low TCA
OSC TX power high TCA
OSC TX power low TCA
By default, TCAs are disabled.
Range Minimum/Maximum
Granularity Default and Recommended Value
0.5 dBm 1/2 dBm per channel
1.5 dBm per channel
NOTE: Assumes VOA setting =0
—2/—1 dBm per channel
—1.5 dBm per channel
NOTE: Assumes VOA setting =0
0.5 dB 36/39 dB
37 dB
N/A N/A
0.5 dBm 5/7 dBm
6 dBm
—47/—46 dBm
—46 dBm
0.5 dBm 5.5/7 dBm
6 dBm
—2/-0.5 dBm
—1 dBm
Copyright © 2018, Juniper Networks, Inc.