Tca (Iplc); Table 12: Iplc Optical Performance Monitors - Juniper PTX3000 IPLC Features Manual

PTX3000 Integrated Photonic Line System Feature Guide

tca (IPLC)

Hierarchy Level
Release Information
Description

Table 12: IPLC Optical Performance Monitors

Performance Monitor
OSC TX power
OSC RX power
OSC/FPGA estimated fiber loss
Line OUT VOA attenuation
EDFA Input power (for both EDFAs)
EDFA Output power (for both EDFAs)
EDFA Signal output power (for both EDFAs)
EDFA Pump current (for both EDFAs)
OCM power readings (64 channels x 1 monitoring points)
Power monitor at ADD port
Power monitor at EXPRESS IN port
104
Syntax tca tca-identifier (enable-tca | no-enable-tca) (threshold number | threshold-24hrs number) ;
[edit chassis fpc fpc-slot optical-options]
Statement introduced in Junos OS Releases 15.1F6 and 17.1R1 for PTX3000 integrated
photonic line system.
Configure the threshold crossing alerts (TCA)s for the integrated photonic line card
(IPLC).
TCAs can give the management system an early indication as to the state of the
associated entity when it crosses a certain threshold. The timely detection of TCAs is
essential to proactively manage the IPLC modules. TCAs are not an indication of a fault,
but rather an indication that the entity may be close to a fault. You can choose which
TCAs you want monitored by enabling the TCA. You can either keep the default threshold
settings or modify the settings.
You can enable TCAs on the IPLC for the performance monitors listed in
Table 12 on page
Each performance monitor supports:
104.
15 Min Bin
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
24 Hr Bin TCA High
Yes Yes
Yes Yes
Yes No
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Copyright © 2018, Juniper Networks, Inc.
TCA Low
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes