Juniper PTX3000 IPLC Features Manual page 71

Table 7: Optical ILA Threshold Crossing Alert Minimum and Maximum Values (continued)
TCA
Erbium-Doped Fiber Amplifier (EDFA) Input Power (for Both EDFAs)
Optical Supervisory Channel (OSC) TX Power
osc-a-tx-power-high-tca
osc-b-tx-power-low-tca
EDFA Input/Output Power Monitors
Power monitor at Input port
Power monitor at output port
Copyright © 2018, Juniper Networks, Inc.
Description
OSC TX power
Input port power monitor
Output port power monitor
To configure a TCA, specify the TCA low and high thresholds for the TCA. This example
enables the osc-a-tx-power-high-tca
performance monitor for optical ILA number 3.
To configure a TCA:
Navigate to the optical ILA amplifier chain configuration hierarchy. For example:
1.
[edit]
user@host# edit chassis fpc 2 optical-options
Configure the 15-minute, low threshold. For example:
2.
[edit chassis fpc 2 optical-options amplifier-chain ila 3 ila-options]
user@host# set osc-b-tx-power-low-tca threshold 2 enable-tca
Configure the 15-minute, high threshold. For example:
3.
[edit chassis fpc 2 optical-options amplifier-chain ila 3 ila-options]
user@host# set osc-a-tx-power-high-tca threshold 4 enable-tca
Configure the 24-hour, low threshold. For example:
4.
[edit chassis fpc 2 optical-options amplifier-chain ila 3 ila-options]
user@host# set osc-b-tx-power-low-tca threshold-24hrs 1 enable-tca
Configure the 24-hour, high threshold. For example:
5.
[edit chassis fpc 2 optical-options amplifier-chain ila 3 ila-options]
user@host# set osc-a-tx-power-high-tca threshold-24hrs 5 enable-tca
Verify the configuration.
6.
[edit chassis fpc 2 optical-options amplifier-chain ila 3 ila-options]
Chapter 7: Configuring Performance Monitor Thresholds
Range
Minimum/Maximum
0/6 dBm
12/—38 dBm
21/—13 dBm
and osc-b-tx-power-low-tca
amplifier-chain
TCA in the TX Power
ila 3 ila-options
55