Juniper PTX3000 IPLC Features Manual page 119

Optical Interface on
the Local Chassis
Example: Switching
Wavelengths to an
Optical Interface on
the Remote Chassis
Required Privilege
Level
Related
Documentation
Copyright © 2018, Juniper Networks, Inc.
[edit]
user@host# set chassis fpc
To switch wavelength 1550.12 on the local IPLC module in slot 2 to an optical interface
on a remote chassis, enter the following:
[edit]
user@host# set chassis fpc
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring the Integrated Photonic Line Card to Switch Wavelengths to Local or
Remote Optical Interfaces on page 29
Understanding How to Configure the Integrated Photonic Line Card on page 9
Understanding the Integrated Photonic Line Card Architecture on page 6
Configuring a Two-Degree Node for Express Traffic on page 21
2optical-options wavelength
2optical-options wavelength
Chapter 11: Configuration Statements
1550.12 switch et-1/1/0
1550.12 switch remote
103