Juniper PTX3000 IPLC Features Manual page 65

Table 5: IPLC Threshold Crossing Alert Minimum and Maximum Values (continued)
TCA
Erbium-Doped Fiber Amplifier (EDFA) Input Power (for Both EDFAs)
ocm-power-high-line-out-tca
ocm-power-low-line-out-tca
Optical Supervisory Channel (OSC) Estimated Fiber Loss
osc-fiber-loss-high-tca
osc-fiber-loss-low-tca
Optical Supervisory Channel (OSC) RX Power
osc-rx-power-high-tca
osc-rx-power-low-tca
Optical Supervisory Channel (OSC) TX Power
osc-tx-power-high-tca
osc-tx-power-low-tca
Copyright © 2018, Juniper Networks, Inc.
Description
OCM Power Line Out high TCA
OCM Power Line Out low TCA
OSC fiber loss high TCA
OSC fiber loss low TCA
OSC RX power high TCA
OSC RX power low TCA
OSC TX power high TCA
OSC TX power low TCA
Chapter 7: Configuring Performance Monitor Thresholds
Range Minimum/Maximum
Default and Recommended
Granularity Value
0.5 dBm 1/2 dBm per channel
1.5 dBm per channel
NOTE: Assumes VOA setting =0
—2/—1 dBm per channel
—1.5 dBm per channel
NOTE: Assumes VOA setting =0
0.5 dB 36/39 dB
37 dB
N/A N/A
0.5 dBm 5/7 dBm
6 dBm
—47/—46 dBm
—46 dBm
0.5 dBm 5.5/7 dBm
6 dBm
—2/-0.5 dBm
—1 dBm
49