Wss-Express-In (Iplc) - Juniper PTX3000 IPLC Features Manual

wss-express-in (IPLC)

Syntax
Hierarchy Level
Release Information
Description
Options
Example
Required Privilege
Level
Related
Documentation
Copyright © 2018, Juniper Networks, Inc.
wss-express-in ;
[edit chassis fpc fpc-slot optical-options
Statement introduced in Junos OS Releases 15.1F6 and 17.1R1 for PTX3000 intergated
photonic line system.
Bypass the specified wavelength on this IPLC module. When you bypass a wavelength,
it does not terminate at the local node, it is passed on to the next IPLC node. Use this
statement to control and manage express traffic at intermediate, two-degree IPLC nodes.
NOTE: Bypassing wavelengths is supported only on IPLC two-degree nodes
running express traffic. For more information, see
Node for Express Traffic" on page
wss-express-in—Bypass the specified wavelength.
NOTE: You can bypass only wavelengths that are expressed-in at
intermediate, two-degree IPLC nodes.
Bypassing a wavelength is a two-step process:
Configure the two-degree IPLC node for express traffic. See
1.
Node for Express Traffic" on page
Bypass the wavelength.
2.
For example, to bypass wavelength 1550.12 on the IPLC module in slot 2 of the
two-degree IPLC node:
[edit]
user@host# set chassis fpc 2 optical-options
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
express-in (IPLC) on page 92
wavelength (IPLC) on page 110
Bypassing a Wavelength on page 25
Chapter 11: Configuration Statements
wavelength nm]
"Configuring a Two-Degree
21.
"Configuring a Two-Degree
21.
wavelength 1550.12 wss-express-in
115