Juniper PTX3000 IPLC Features Manual page 125

Options
Example
Required Privilege
Level
Related
Documentation
Copyright © 2018, Juniper Networks, Inc.
tca-identifier—Specify the name of the TCA identifier.
enable-tca | no-enable-tca—Enable or disable the threshold crossing alert.
threshold number—Specify the 15-minute interval threshold.
threshold-24hrs number—Specify the 24-hour interval threshold.
See Table 13 on page 106 for a description of all TCAs, as well as the default, minimum,
maximum, and recommended threshold values.
To specify the 15-minute and 24-hour interval thresholds for the optical supervisory
channel receive power, enter the following:
[edit]
user@host# set chassis fpc 2 optical-options tca osc-rx-power-low-tca threshold -46
enable-tca
user@host# set chassis fpc 2 optical-options tca osc-rx-power-high-tca threshold 5.5
enable-tca
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Enabling and Configuring Thresholds on the Integrated Photonic Line Card Performance
Monitors on page 45
show chassis fpc optical-properties alarms on page 119
show chassis fpc optical-properties edfa on page 122
show chassis fpc optical-properties status on page 140
Integrated Photonic Line Card Base and Expansion Module Overview on page 3
Understanding the Integrated Photonic Line Card Architecture on page 6
Chapter 11: Configuration Statements
109