Ports - Juniper PTX3000 IPLC Features Manual

PTX3000 Integrated Photonic Line System Feature Guide
Related
Documentation
Configuring Wavelengths on the Integrated Photonic Line Card Add and Drop Ports
22
[edit]
user@host# set chassis fpc 2 optical-options
NOTE: You can have only one association between two IPLC base modules
running in express-in
Verify that the two IPLC base modules are now associated together. For example:
3.
[edit chassis fpc 1]
user@host# show
optical-options {
express-in {
fpc {
2;
}
}
}
[edit chassis fpc 2]
user@host# show
optical-options {
express-in {
fpc {
1;
}
}
}
If the configuration is correct, save it.
4.
[edit chassis]
user@host# commit
Configure the wavelengths on the IPLC ports, see
5.
page 25.
Understanding How to Configure the Integrated Photonic Line Card on page 9
Understanding the Integrated Photonic Line Card Architecture on page 6
Example: Integrated Photonic Line Card in a Metro Linear Packet Optical Configuration
on page 59
To configure the IPLC to add or drop a specific wavelength:
Specify the slot location of the IPLC module and access the IPLC configuration
1.
hierarchy.
express-in fpc 1
mode.
"Bypassing a Wavelength" on
Copyright © 2018, Juniper Networks, Inc.