Enabling Or Disabling The Optical Supervisory Channel Laser - Juniper PTX3000 IPLC Features Manual

PTX3000 Integrated Photonic Line System Feature Guide
Related
Documentation

Enabling or Disabling the Optical Supervisory Channel Laser

82
Confirm the configuration.
4.
[edit chassis fpc 2 optical-options]
user@host# show
no-disable-edfa;
}
Save your configuration.
5.
[edit chassis fpc 2 optical-options]
user@host# commit
Enabling or Disabling the Optical Supervisory Channel Laser on page 82
optical-options on page 100
When you need to perform maintenance or troubleshooting, you can disable the optical
supervisory channel laser on the IPLC module.
BEST PRACTICE:
from the Line IN
disable the optical supervisory channel laser and the erbium-doped fiber
amplifiers on the IPLC.
Always refer to the PTX3000 Packet Transport Router Hardware Guide when
connecting or disconnecting cables on the IPLC modules. See
Transport Router Hardware Guide
To enable or disable the optical supervisory channel laser:
Access the IPLC configuration hierarchy.
1.
[edit]
user@host# edit chassis fpc 2
(Optional), To enable the optical supervisory channel laser.
2.
[edit chassis fpc 2 optical-options]
user@host# set no-disable-osc
(Optional), To disable the optical supervisory channel laser.
3.
[edit chassis fpc 2 optical-options]
user@host# set disable-osc
Confirm the configuration.
4.
[edit chassis fpc 2 optical-options]
Anytime you need to disconnect or connect the fiber span
and Line OUT ports on the IPLC module, we recommend you
.
optical-options
PTX3000 Packet
Copyright © 2018, Juniper Networks, Inc.