Table 8: Example Configuration Summary - Juniper PTX3000 IPLC Features Manual

PTX3000 Integrated Photonic Line System Feature Guide

Table 8: Example Configuration Summary

Node A
Optical
Interface
Waveform is
Switched to
on PTX3000
Wavelength Chassis
1554.54 —
1556.15 et-12/0/3
1556.96 et-12/0/2
62
BEST PRACTICE:
from the
Line IN
disable the optical supervisory channel and the erbium-doped fiber amplifiers
on the IPLC.
Always refer to the PTX3000 Packet Transport Router Hardware Guide when
connecting or disconnecting cables on the IPLC modules. See
Transport Router Hardware Guide
This example results in the following configuration:
Node B
IPLC
Optical
Interface
Slot:
Waveform is
Switched to
Port:
on PTX3000
Mode: Chassis
— et-8/0/4
Slot: 1 —
Port: 6
Mode: switch
Slot: 1 et-8/0/3
Port: 5
Mode: switch
Anytime you need to disconnect or connect the fiber span
and ports on the IPLC module, we recommend you
Line OUT
.
IPLC
Slot:
Port:
Mode:
Slot: 2
Port: 8
Mode: switch
Slot: 2
Port: 6
Mode:
wss-express-in (bypass)
Slot: 3
Port: 6
Mode:
(bypass)
wss-express-in
Slot: 3
Port: 5
Mode: switch
PTX3000 Packet
Node C
Optical
IPLC
Interface
Waveform
Slot:
is Switched
to on
Port:
PTX3000
Chassis Mode:
et-10/0/2 Slot: 8
Port: 8
Mode: switch
et-10/0/3 Slot: 8
Port: 6
Mode: switch
— —
Copyright © 2018, Juniper Networks, Inc.