Juniper PTX3000 IPLC Features Manual page 94

PTX3000 Integrated Photonic Line System Feature Guide
Configuring the PTX3000 Integrated Photonic Line System at Site B
CLI Quick
Configuration
PTX3000 Integrated
Photonic Line System
at Site
Step-by-Step
Procedure
Verification
Purpose
78
To quickly configure this example, copy the following commands, paste them into a text
file, remove any line breaks, change any details necessary to match your network
configuration, and then copy and paste the commands into the CLI at the
level.
set chassis fpc 3 optical-options amplifier-chain anchor-iplc
set chassis fpc 3 optical-options amplifier-chain osc-ip 10.0.0.10/24
set chassis fpc 3 optical-options amplifier-chain osc-mac aa:bb:cc:dd:ee:ff
To configure the PTX3000 integrated photonic line system at Site B:
Configure the IPLC module at Site B.
1.
[edit chassis fpc 3 optical-options amplifier-chain]
set no-anchor-iplc
set osc-ip 10.0.0.14/24
set osc-mac ab:cd:ef:gh:ff:dc
Verify the configuration is correct.
2.
[edit chassis fpc 3]
user@host# show chassis fpc 3
user@host# show chassis fpc 3
optical-options {
amplifier-chain {
no-anchor-iplc;
osc-ip 10.0.0.14/24;
osc-mac ab:cd:ef:gh:ff:dc;
}
}
If the configuration is correct, save it.
3.
user@host# commit
Confirm the configuration is working properly.
Verifying the Topology of the Amplifier Chain on page 78
Verifying the Topology of the Amplifier Chain
Display the IPLC and optical ILA basic information for the complete amplifier chain
including the •
Display the IP addresses, names, reachability, and connection status for the anchor IPLC
Anchor IPLC and OSC IP address
[edit] hierarchy
Copyright © 2018, Juniper Networks, Inc.