Juniper PTX3000 IPLC Features Manual page 402

PTX3000 Integrated Photonic Line System Feature Guide
Syntax (PTX10008
Series)
Syntax (EX9251,
EX9253 Switches)
Release Information
Description
Options
386
show chassis environment fpc
<fpc-slot>
show chassis environment fpc
<fpc-slot>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Command introduced in Junos OS Release 11.1 for QFX Series.
Command introduced in Junos OS Release 12.1X48 for PTX Series Packet Transport
Routers.
Command introduced in Junos OS Release 12.1 for T4000 Core Routers.
Command introduced in Junos OS Release 12.3 for MX 2010 and MX2020 3D Universal
Edge Routers.
Command introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
option introduced in Junos OS Release 14.2R3.
satellite
Command introduced in Junos OS Release 17.2 for MX2008 3D Universal Edge Routers.
Command introduced in Junos OS Release 17.2 for PTX10008 Routers.
Command introduced in Junos OS Release 17.3 for MX10003 3D Universal Edge Routers.
Command introduced in Junos OS Release 17.4 for MX204 3D Universal Edge Routers.
Command introduced in Junos OS Release 18.1R1 for EX9251 switches.
Command introduced in Junos OS Release 18.2 for EX9253 Switches.
Command introduced in Junos OS Release 18.2R1 for MX10008 3D Universal Edge Routers.
(M40e, M120, M160, M320, MX Series, T Series routers, EX Series, QFX Series, and PTX
Series routers only) Display environmental information about Flexible PIC Concentrators
(FPCs).
none—Display environmental information about all FPCs. On a TX Matrix router, display
environmental information about all FPCs on the TX Matrix router and its attached
T640 routers. On a TX Matrix Plus router, display environmental information about
all FPCs on the TX Matrix Plus router and its attached routers.
all-members—(MX Series routers only) (Optional) Display environmental information
for the FPCs in all the members of the Virtual Chassis configuration.
interconnect-device name—(QFabric systems only) (Optional) Display chassis
environmental information for the Interconnect device.
lcc number—(TX Matrix router and TX Matrix Plus router only) (Optional) Line-card
chassis number.
Replace number with the following values depending on the LCC configuration:
0 through 3, when T640 routers are connected to a TX Matrix router in a routing
matrix.
0 through 3, when T1600 routers are connected to a TX Matrix Plus router in a
routing matrix.
Copyright © 2018, Juniper Networks, Inc.