Os Cli; Table 3: Summary Of Optical Ila Configuration Capabilities In Junos Os Cli - Juniper PTX3000 IPLC Features Manual

PTX3000 Integrated Photonic Line System Feature Guide

Table 3: Summary of Optical ILA Configuration Capabilities in Junos OS CLI

Optical ILA
Configuration Capability
in Junos OS CLI
Unique identification
number
IP address
Security, software
upgrades, and resets
Status
14
The following various get/set commands are supported from the SNMP NMS:
Commands: Save a configuration, restore a configuration, upgrade firmware
Set the optical ILA: power threshold crossing alerts (TCA)s for the optical ILA
performance monitors
Get the specified optical ILA: part number, serial number, uptime, temperature, fan
speed, firmware upgrade status, SNMP user information, EDFA (module type, part
number, working status, gain, temperature), optical power, VOA attenuation, and OSC
(index).
View active alarms and historical alarms
Optical ILA Control and Management Features Available in the Junos OS CLI
The OSC enables you to control and manage certain capabilities on the optical ILA
through the Junos OS CLI.
the optical ILA.
NOTE: To configure all other optical ILA parameters not supported in the
Junos OS CLI, see
Line Card .
What it is and Where to Find it in the Guide
Configure a unique ID for the optical ILA for OSC communication, see
Identification Number" on page 37
Configure the optical ILA IP address for OSC communication, see
an Optical Inline Amplifier" on page 39
Configure user authentication, perform software upgrades and soft and hard reset, see
Optical ILA Authentication Through the Junos OS CLI" on page 40
Inline Amplifier from the Junos OS CLI" on page 41
View statistics for the following components on the optical ILA:
View manufacturing details, power and temperature information, fan information, and so on:
show chassis fpc optical-properties amplifier-chain ila summary
EDFA (E_AB or E_BA), see
OSC (OSC_A and OSC_B), see
VOA (VOA_A and VOA_B), see
Alarms, see
show chassis fpc optical-properties amplifier-chain ila alarms
Table 3 on page 14 describes the Junos OS CLI capabilities for
PTX3000 Packet Transport Router with Integrated Photonic
show chassis fpc optical-properties amplifier-chain ila edfa
show chassis fpc optical-properties amplifier-chain ila osc
show chassis fpc optical-properties amplifier-chain ila voa
"Configuring the Optical ILA
"Configuring the IP Address of
"Configuring
and "Upgrading the Optical
Copyright © 2018, Juniper Networks, Inc.