Juniper PTX3000 IPLC Features Manual page 163

Options
Copyright © 2018, Juniper Networks, Inc.
none—Display information about hardware. For a TX Matrix router, display information
about the TX Matrix router and its attached T640 routers. For a TX Matrix Plus router,
display information about the TX Matrix Plus router and its attached routers.
clei-models—(Optional) Display Common Language Equipment Identifier (CLEI) barcode
and model number for orderable field-replaceable units (FRUs).
detail—(Optional) Include RAM and disk information in output.
extensive—(Optional) Display ID EEPROM information.
all-members—(MX Series routers only) (Optional) Display hardware-specific information
for all the members of the Virtual Chassis configuration.
interconnect-device name—(QFabric systems only) (Optional) Display hardware-specific
information for the Interconnect device.
lcc number—(TX Matrix routers and TX Matrix Plus router only) (Optional) On a TX Matrix
router, display hardware information for a specified T640 router (line-card chassis)
that is connected to the TX Matrix router. On a TX Matrix Plus router, display hardware
information for a specified router (line-card chassis) that is connected to the
TX Matrix Plus router.
Replace number with the following values depending on the LCC configuration:
0 through 3, when T640 routers are connected to a TX Matrix router in a routing
matrix.
0 through 3, when T1600 routers are connected to a TX Matrix Plus router in a
routing matrix.
0 through 7, when T1600 routers are connected to a TX Matrix Plus router with 3D
SIBs in a routing matrix.
0, 2, 4, or 6, when T4000 routers are connected to a TX Matrix Plus router with
3D SIBs in a routing matrix.
local—(MX Series routers only) (Optional) Display hardware-specific information for the
local Virtual Chassis members.
member member-id—(MX Series routers and EX Series switches) (Optional) Display
hardware-specific information for the specified member of the Virtual Chassis
configuration. Replace member-id variable with a value 0 or 1.
models—(Optional) Display model numbers and part numbers for orderable FRUs and,
for components that use ID EEPROM format v2, the CLEI code.
node-device name—(QFabric systems only) (Optional) Display hardware-specific
information for the Node device.
satellite [slot-id slot-id | device-alias alias-name]—(Junos Fusion only) (Optional)
Display hardware information for the specified satellite device in a Junos Fusion, or
for all satellite devices in the Junos Fusion if no satellite devices are specified.
Chapter 12: Operational Commands
147