Juniper PTX3000 IPLC Features Manual page 48

PTX3000 Integrated Photonic Line System Feature Guide
See Also
Related
Documentation
32
user@host# edit chassis fpc slot
For example, if the IPLC module resides in slot 1:
[edit]
user@host# edit chassis fpc 1 optical-options
Specify the wavelength to switch to the remote optical interface.
2.
[edit chassis fpc 1 optical-options]
user@host# set wavelength
For example, if you want to add or drop wavelength 1550.12 to a remote optical
interface:
[edit chassis fpc 1 optical-options]
user@host# set wavelength 1550.12 switch remote
Verify that the configuration is correct. For example:
3.
[edit chassis fpc 1 optical-options]
user@host# show
wavelength 1550.12 {
switch {
remote;
}
}
If the configuration is correct, save it.
4.
[edit chassis fpc 1 optical-options]
user@host# commit
Understanding How to Configure the Integrated Photonic Line Card on page 9
Bypassing a Wavelength on page 25
Integrated Photonic Line Card Base and Expansion Module Overview on page 3
Understanding the Integrated Photonic Line Card Architecture on page 6
Integrated Photonic Line Card Base and Expansion Module Overview on page 3
Understanding the Integrated Photonic Line Card Architecture on page 6
Understanding How to Configure the Integrated Photonic Line Card on page 9
Bypassing a Wavelength on page 25
optical-options
nm switch remote
Copyright © 2018, Juniper Networks, Inc.