Front Caster Fork Bearing Replacement; Front Caster Fork Bearing Removal - Toro titan Z4800 Service Manual

Front Caster Fork Bearing
The following procedure is performed on the left hand
caster fork assembly. The same procedure should
be followed when replacing the right hand caster fork
assembly and bearings.

Front Caster Fork Bearing Removal

1. Park the machine on a level surface, disengage
the blade control (PTO), and turn the ignition key to
"OFF" to stop the engine. Remove the ignition key.
2. Raise the front of the machine high enough to permit
removing the caster fork assembly from the front
axle assembly (Fig. 006).
Fig. 006
2007 - 2008 Titan Z Service Manual
3. Remove the hex head bolt and washer securing the
caster fork assembly to the front axle (Fig. 007).
4. Slide the caster fork assembly out of the front axle
bearings (Fig. 008).
IMG-0163a
CHASSIS
Fig. 007 IMG-0164
Fig. 008 IMG-0165
3
3-3