1173SBM1100A
11
IMAGE ERASE LAMP
To prevent a black band from occurring across both the leading and trailing edges, and
along the front and rear edges, of the electrostatic latent image, 38 LEDs of the Image
Erase Lamp are turned ON before development takes place, thereby reducing to a mini-
mum the unnecessary potential on the surface of the PC Drum.
Because of the light path involved, this copier has this edge erasing cycle between drum
charging and exposure.
The position of the Image Erase Lamp can be adjusted using the adjusting screw at the
front of the copier.
Copier Rear
Frame
Compression
Spring
PC Drum Charge Corona
Image Erase Lamp
Board
M-21
Image Erase Lamp LA3
Exposure
1139M031AA
Copier Front Frame
Adjusting Screw
1139M032AA
Image Erase Lamp
Holder