Antispill Plate
(2) Cleaning of Main Erase Lamp
1149D067AA
21. Refit the parts to the Imaging Unit and reinstall the
Imaging Unit in the copier.
22. Load fresh starter and make the ATDC adjustment.
1139D020AA
1. Remove the Imaging Unit.
2. Remove Main Erase Lamp (two screws).
1149D021AA
3. Using a brush or a soft cloth dampened with alco-
hol, clean Main Erase Lamp.
NOTE
• Use care not to touch the lamp with bare hands.
1149D022AA
D-32