Adjustment Of The Optimum Exposure Setting In The Manual Mode - Minolta EP3010 Manual

(2) Adjustment of the Optimum Exposure Setting in the Manual Mode

Requirement
• When the manual exposure setting is at the central indication, no image of step no. 1 of a
Kodak Gray Scale should be produced on the copy, but a faint image of step no. 2 should
be produced.
Important
• This adjustment should be carried out only after completing "Adjustment of the Optimum
Exposure Setting in the Auto Mode" and "Adjustment of the Aperture Blades."
No image of Faint image of
step no. 1 step no. 2
1. Place the Kodak Gray Scale lengthwise, face
down, and at the center on the Original Glass.
Place a sheet of pure white A3 or 11" × 17" paper
over it and then lower the Original Cover.
2. Set the copier into the Manual Exposure Mode. Set
the Exposure Setting to the central or fifth indica-
tion and enter 15 copies to be made by using the
Multi-Copy Keys. (Use A3 paper.)
1139D012AA
3. Press the Start Key.
Check that the 15th copy meets the requirement
given above.
4. On the control panel, press the User Mode key,
Meter Count key, Stop key, 10-keys "0", 10-keys
"0", Stop key, 10-keys "0", and 10-keys "1", in that
order, to set the copier into the Tech. Rep. mode.
5. Touch "Function" to open the Function menu.
1149D082CA
6. Touch "F5 Optimum & AE".
7. Using the Zoom Up/Down Keys, vary the value on
the Magnification Ratio Indicator as necessary.
8. After the adjustment has been made, press the
Panel Reset Key twice (or turn OFF the Power
Switch) to return the copier back into the normal
mode.
NOTE
1149D087CA
Increase the value to make the image lighter.
Decrease the value to make the image darker.
D-50
1139D270AA