Factory Setting; Factory Setting Menu Screen; Factory Setting Function Setting Procedure - Minolta EP3010 Manual

37

FACTORY SETTING

• Factory Setting is used to make adjustments at the factory.

37-1. Factory Setting Menu Screen

37-2. Factory Setting Function Setting Procedure

<Setting Procedure>
1. Show the Service Mode Menu on the Touch Panel and press the following keys in this
order.
2. Enter the Factory Setting mode by pressing the following keys in this order.
→
Stop key
Start key
3. Select the particular Factory Setting mode function to be set.
4. Make the necessary settings by following the instructions given sequentially on the
screen.
NOTE
The function selected is highlighted.
<Exiting the Mode>
• Press the Panel Reset key on the control panel.
• Touch "Menu" on the Touch Panel.
1149O424CA
S-43