Minolta EP3010 Manual page 185

3. Unhook the spring and remove the length of the
cable on the right (looking at the copier from the
rear).
1139D129AA
4. Move the 2nd/3rd Mirrors Carriage toward the
Scanner Drive Gear so that the cable slacks off
and then remove the length of cable on the left
(looking at the copier from the rear).
5. Remove Master Board (four screws).
1139D130AA
6. Remove Optical Section Cooling Fan Motor (two
screws).
7. Remove the ADF fixing bracket (one screw).
1149D035AA
8. Unhook the spring and remove Scanner Motor
(three screws).
1149D036AA
9. Snap off the Support Plate and remove the Scan-
ner Drive Pulley.
1174D008AA
D-23