Minolta EP3010 Manual page 270

AD-11 Storage Misfeed Troubleshooting Procedure
Symptom Step
The leading edge
1
of the paper is sta-
tionary inside the
Duplex Unit.
2
3
Paper is station-
ary at the Storage
Section.
1
Check Item
Is the Paper Guide Mylar dirty
or deformed?
Does PC14 operate properly?
Using the IC Port Data Check
function, make an input port
check on PWB-A (Dup) (IC1G)
PC1.
Does SL31 operate properly?
Using the IC Port Data Check
function, set the data of PWB-
A (Dup) (IC1G) PH1 to "0".
Does PC15 operate properly?
Using the IC Port Data Check
function, make an input port
check on PWB-A (Dup) (IC1G)
PC2.
T-33
Result Action
Clean or replace the Mylar.
YES
Replace PWB-G, PWB-A or
YES
PWB-A (PF-206, PF-112).
Check the operation of the
NO actuator of PC14. If it operates
properly, replace PC14.
Check the operation of the
YES
Gate Switching Lever.
Replace PWB-G, PWB-A,
NO PWB-A (PF-206, PF-112) and/
or SL31.
Replace PWB-G, PWB-A or
YES
PWB-A (PF-206, PF-112).
Check the operation of the
NO actuator of PC15. If it operates
properly, replace PC15.