Adjustment Of The Zoom Ratio In The Feeding Direction ("A3 Feed Direction Mag. Ratio" Of Adjust Mode - Minolta EP3010 Manual

(7) Adjustment of the Zoom Ratio in the Feeding Direction ("A3 Feed Direction
Mag. Ratio" of Adjust Mode)
• Adjust mode setting range: 42 to 58
Important
• This adjustment must be made before the "Adjustment of the Leading Edge Registra-
tion."
• Prepare a GTC-003 Chart and, using part A shown
in the illustration on the left, adjust to meet the fol-
lowing specifications on the copy.
Zoom Ratio
Full Size (× 1.000)
Enlargement (× 2.000)
Reduction (× 0.500)
1136D028AA
1. Place the chart in alignment with the reference
mark (
the Original Cover.
2. Make a copy at full size (× 1.000) in a single copy
run and check the image.
1136D026AA
3. If the specifications are not met, press the User
Mode key, Meter Count key, Stop key, 10-keys "0",
10-keys "0", Stop key, 10-keys "0", and 10-keys "1",
in that order, on the control panel to set the copier
into the Tech. Rep. mode.
4. Press the Stop key and then the Start key to set
the copier into the Factory Setting mode.
1149D086CA
5. Touch "Adjust" to open the "Adjust 1/2" menu.
6. Touch " " to highlight "A3 Feed Direction Mag.
Ratio."
1173D018CA
D-55
Width A (mm)
300 ± 1.50
300 ± 2.25
150 ± 2.25
) on the Original Width Scale and lower