Accessory Test - Minolta EP3010 Manual

(8) Accessory Test

• This function is used to make an operation check and adjustments of the ADF and Sorter
or Staple Sorter.
Touch Panel
Display
ADF Check Enables the operation check and adjustments to be performed for the
document feeder.
Paper Passage & Makes a paper passage test in each operating mode of the ADF and
Input Check checks the sensors along the paper path for operation.
NOTE
"1" - paper present; "0" - paper not present
<Procedure>
1. Select the operating mode to be checked and touch "Next."
2. Load the required number of originals into the Document Feed
Output Check Checks each of the motors and solenoids for operation.
<Procedure>
• Select the part to be checked and press the Start key.
[Tech. Rep. Mode
Setting (The default is
Step Feed
Normal
Empty Sensor
ADF Entrance Sensor
Register Sensor
Exit Sensor
Auto Feeder Empty Sensor
Tray and press the Start key.
M1 M2
SL1 SL2
S-35

Accessory Test]

Highlighted
2in1 2-Sided
SADF
Width Sensor A
Width Sensor B
Width Sensor C
Exit Drawer Sensor
Orig. Move Home Sensor
M3 M4
SL3 SL4
.)
M5
CL