Minolta EP3010 Manual page 116

Touch Panel
Display
Exposure Mode Specify the default exposure mode selected automatically when
Priority power is turned ON or the Panel Reset key pressed.
Exposure Level Auto:
Priority Manual: Set the default exposure level in the Manual Exposure mode.
NOTE
EXP. 1 (Lighter) to EXP. 9 (Darker)
Manual Exposure Determine the default voltage curve (EXP. level) in the Manual Expo-
Adjust sure mode, as optimized by the type of original.
NOTE
EXP. 5 uses as reference the voltage value automatically adjusted by
the F5 operation.
Finishing Priority Select the default finishing type when the copier is equipped with a
Sorter or Staple Sorter.
NOTE
Hole Punch can be combined with any one of the left functions.
[2/6]
Setting (The default is
Auto
Select the default exposure level in the Auto Exposure mode.
Lighter
<Manual Exposure>
Lighter
Halftone images, photos
Mode 1
Mode 2 Ordinary originals
Mode 3 Originals with a colored back-
ground or faint texts
<Manual Exposure Voltages in Different Modes>
Manual Exposure Voltage (V)
EXP. 1
Mode 1 +5 +5 +2 +1
Mode 2 +5 +5 +4 +2
Mode 3 +5 +5 +5 +3
Non Sort
Sort Sort Staple
S-10
Highlighted
Manual
<Auto Exposure>
Normal
Normal
2 3 4 5 6
0 –1 –2 –5 –8
0 –2 –4 –6 –8
0 –3 –6 –7 –8
Group
+ Hole Punch
.)
Darker
Darker
7 8 9