Minolta EP3010 Manual page 127

Touch Panel Display
Leading Edge Erase
Trailing Edge Erase
Loop Adjust (Drawer) Adjust the length of the loop before the Synchronizing Rollers to
Loop Adjust (Man)
[Tech. Rep. Mode Tech. Rep. Choice 1/2]
Setting (The default is
Select whether to enable ("Yes") or disable ("No") the leading edge
erase.
NO
Select whether to enable ("Yes") or disable ("No") the trailing edge
erase.
NO
be formed in paper fed from the copier drawer.
Display Description
47 Loop length approx.
1 mm
48 Loop length approx.
3 mm
49 Loop length approx.
5 mm
Loop length approx.
50
7 mm
Adjust the length of the loop before the Synchronizing Rollers to
be formed in paper fed via the Multi Bypass Tray or a paper feeder
option.
Display Description
47 Loop length approx.
1 mm
48 Loop length approx.
3 mm
49 Loop length approx.
5 mm
Loop length approx.
50
7 mm
S-21
Highlighted
.)
YES
YES
Display Description
51 Loop length approx.
9 mm
52 Loop length approx.
11 mm
53 Loop length approx.
13 mm
Display Description
51 Loop length approx.
9 mm
52 Loop length approx.
11 mm
53 Loop length approx.
13 mm