Minolta EP3010 Manual page 148

Touch Panel Display
Vendor Mode
Copy Kit Counter
Copy Kit
[Security Mode Menu]
Setting (The default is
Make the display setting according to the type of the optional ven-
dor mounted on the copier. (Japan only)
Disables the Copy Kit counter.
Key Counter
Coin Vendor
Card
NOTE
Select "Key Counter." No other setting should be made.
Select whether to enable or disable the "Copy kit count"; if the
counter is to be enabled, select whether to allow or inhibit the start
of a copy cycle when the count reaches the preset value.
Disables the Copy Kit counter.
NO
Mode 1 Copying not inhibited after the count reaches
the preset value.
Mode 2 Copying inhibited after the count reaches the
preset value.
NOTE
The Copy Kit counter is enabled by selecting mode 1 or 2. When
the count reaches the preset value, the maintenance call reminder
message is given, together with the display of maintenance code
"M4" even if "No" has been selected for "Maintenance."
Set the Copy Kit counter value when "Mode 1" or "Mode 2" is
selected for "Copy Kit Counter."
S-42
Highlighted
.)