Cleaning Of Image Erase Lamp - Minolta EP3010 Manual

(3) Cleaning of Image Erase Lamp

1. Remove Master Board (four screws).
1149D023AA
2. Insert Master Board into the copier to secure it.
1149D024AA
3. Go to the rear of the copier and unplug one Image
Erase Lamp connector.
1149D025AA
4. Remove the Imaging Unit.
5. Remove Image Erase Lamp (one screw).
NOTE
• When removing Image Erase Lamp, use care not to
lose the pressure spring in the rear.
1139D172AA
6. Using a brush or a soft cloth dampened with alco-
hol, wipe clean Image Erase Lamp.
NOTE
• After Image Erase Lamp has been cleaned, make
the "Adjustment of the Image Erase Lamp Position."
1139D173AA
D-33