Minolta EP3010 Manual page 120

Touch Panel
Display
Orig. Copy Select the type of Orig.
Default the copier is turned ON or Panel Reset key pressed. If "Duplex only"
is selected for "Simplex/Duplex" of the "Tech. Rep. Choice" function,
neither 1
NOTE
Some of the functions may not be displayed depending on the type of
options the copier is equipped with.
Auto Power-off Select whether to turn ON or OFF the Auto Shut Off function that
Mode shuts down the copier a given period of time after a copy cycle has
been completed or the last key operated.
Selecting "ON" means setting the time it takes the Auto Shut Off func-
tion to be activated, that can range from 1 min. to 240 min.
NOTE
"OFF" is displayed when "Enable" is selected for "Non-Auto Shut off"
of the "Administrator Mode" function.
Original on Glass Select whether to turn "ON" or "OFF" the beep that sounds when you
attempt to load an original in the document feeder with another one
left on the glass.
Administrator The entry of the "Administrator #" set using the Tech. Rep. mode per-
Mode mits the settings of the following functions.
Copy Track Select the number of accounts to be controlled.
Mode
Copy Track This function is displayed when the above "Copy Track" is changed,
Mode prompting you to select whether to initialize ("YES") the copy track
data so far taken or not ("NO").
Copy Track Data When "Count Reset" is touched, it clears all data under control.
[6/6]
Setting (The default is
Copy setting selected automatically when
1 nor 1 2in1 are displayed.
1 1 1
1
1 2
OFF
Beep ON
100 Accounts
OFF
YES (initialized)
S-14
Highlighted .)
2 in1
2-2 in1 2 2
1 to 240 (60 min.)
Beep OFF
1000 Accounts
NO (not initialized)