35
TECH. REP. MODE
• This mode is used by the Tech. Rep. to set, check, adjust, and/or program various ser-
vice functions.
35-1. Tech. Rep. Mode Menu Screen
35-2. Tech. Rep. Mode Function Setting Procedure
<Setting Procedure>
1. With the Meter Count screen opened from User Mode, press the flowing keys in this
order.
→
Stop key
0
2. Select the particular Tech. Rep. mode function to be set.
3. Make the necessary settings by following the instructions given sequentially on the
screen.
NOTE
The function selected is highlighted.
<Exiting the Mode>
• Press the Panel Reset key on the control panel.
• Touch "Exit" on the Touch Panel.
→
→
Stop key
0
S-16
1173S002CA
→
→
0
1