Minolta EP3010 Manual page 179

12. Remove two screws and the Lower Guide.
1139D102AA
13. Remove four screws and the Separator Guide
Plate Unit.
1139D103AA
NOTE
When reinstalling the Separator Guide Plate Unit,
press the parts shown on the left up against the copier
frame (both at front and rear).
1139D104AA
14. Remove two screws and the Lever.
1139D105AA
15. Snap off one C-clip and remove the Separator Unit.
NOTE
• The space is narrow, try using tweezers or forceps
when reinstalling the C-clip.
1139D106AA
D-17