Minolta EP3010 Manual page 118

Touch Panel
Display
Intelligent Sort Select whether to turn "ON" or "OFF" the function that automatically
switches between Sort and Non-Sort according to the number of orig-
inals loaded in the document feeder.
NOTE
This function is enabled when "Mixed Orig. Detection" is turned "OFF"
and the copier is in the Auto Paper or Auto Size mode.
Confirmation Beep Select whether to turn "ON" or "OFF" the beep that sounds each time
a key on the control panel is pressed or that on the Touch Panel is
touched.
Original Thickness Select whether to allow ("Thin") the user to make copies from thin
originals in addition to the standard ones or not ("Standard") using the
document feeder.
Smaller Originals Select whether to enable ("ON") a copy cycle or not ("OFF") when it is
initiated by pressing the Start key with an original of the smallest
detectable size (metric areas: A5 or smaller; inch areas: Letter or
smaller) placed on the Original Glass.
NOTE
The default setting is OFF for the metric areas and ON for the inch
areas.
Setting (The default is
ON
ON
Standard
The original is pressed against
the Original Width Scale when
stopped.
ON
The copy cycle is run using the
paper loaded in the default
paper source.
S-12
[4/6]
Highlighted
The original is not pressed
against the Original Width Scale
when stopped.
A warning message is given and
the copier inhibits the start of
this copy cycle.
.)
OFF
OFF
Thin
OFF