Minolta EP3010 Manual page 135

Touch Panel Display
Port/option
[Tech. Rep. Mode
Shows the frequency of use of each of the different parts of the
copier including options to serve as a guideline for the mainte-
nance time for the Tech. Rep.
Display Description
Manual No. of sheets of
Feed paper fed from the
Multi Bypass Tray
1st No. of sheets of
Drawer paper fed from the
1st Drawer
2nd No. of sheets of
Drawer paper fed from the
2nd Drawer
Display Description
ADF No. of sheets of
Entrance paper fed through
the ADF take-up sec-
tion.
ADF No. of originals fed
Reverse through the turnover
unit of the ADF
DUP No. of sheets of
paper fed from the
Duplex Unit
Display
PC No. of revolutions of the PC Drum, as converted to
Drum the number of sheets of A4 crosswise paper fed
through the copier
Devel- No. of sheets of paper fed through
oper
Fusing No. of revolutions of the Fusing Roller, as converted
Roller to the number of sheets of A4 crosswise paper fed
through the copier
<Clearing a Count>
Using the or key, highlight the count to be cleared, then press
the Clear key.
NOTE
If a count is accidentally cleared, pressing the Interrupt key will
undo the clear operation.
S-29
Counter]
Operation
<Port/Option 1/3>
Display
3rd No. of sheets of
Drawer paper fed from the
3rd Drawer
4th No. of sheets of
Drawer paper fed from the
4th Drawer
5th No. of sheets of
Drawer paper fed from the
5th Drawer
<Port/Option 2/3>
Display
No. of sheets of
paper fed out of the
Sorter
Sorter
No. of stapling
Staple sequences per-
formed
No. of punching
Punch sequences per-
formed
<Port/Option 3/3>
Description
Description
Description