User's Choice Mode; User's Choice Selection Screen; User's Choice Function Setting Procedure - Minolta EP3010 Manual

34

USER'S CHOICE MODE

• The User's Choice mode available from the User Mode menu is used to make various
settings according to the user's needs.

34-1. User's Choice Selection Screen

1173S001CB

34-2. User's Choice Function Setting Procedure

<Setting Procedure>
1. Press the User Mode key on the control panel and then touch the [User's Choice] key.
2. Select the page number key that contains the desired function from among 1/6 through
6/6 shown at the bottom of the Touch Panel.
3. Select the function to be set and make settings as required.
4. After the settings are complete, touch the [Enter] key to validate the settings.
NOTE
The function selected is highlighted.
<Exiting the Mode>
Perform any one of the following steps to go back to the Basic screen.
• Press the Panel Reset key on the control panel.
• Touch [Exit] on the Touch Panel.
S-7